Refinishing a fiberglass door that just looks like wood is not all that disparate to refinishing a real hardwood door. The main distinction is that you would typically sand a hardwood door before refinishing it. Because fiberglass doors don’t presuppose sanding, refinishing them is all in all a substance transform. Provided that you are whatsoever uncomfortable working with lethal chemicals, for example solvents and polyurethane, this is work better left to the experts.
- Remove the door from its hinges and take off any hardware, for example the doorknob. Set the hardware aside and place the door in a generally ventilated work space.
- Strip the definitive finish using mineral spirits or other finish-stripping dissolvable. Wipe the dissolvable on the door with a clean material and permit the dissolvable to splash for around the range of five minutes before wiping the door clean. Apply more dissolvable as vital.
- Wash the door with hot, lathery water and a new material. Flush the door thoroughly and permit it to dry. Prop it up and gave it a chance to sit at a point to help it dry speedier.
- Rub a gel-sort oil stain into the grain of the fiberglass with a clean material. Since this is a wood-look door, it will have its own grain. Continuously work with the grain when applying stain and sealers. Wipe away the overabundance stain with a clean fabric.
- Let the stain dry into the fiberglass. When the stain is completely dry, you can apply a protective topcoat, for example polyurethane. Blend the polyurethane deliberately, then pour a little measure in a container.
- Spread the polyurethane over the fiberglass door with a froth or sheep’s downy implement. Likewise with the stain, the polyurethane must be connected with the grain. Permit the polyurethane to dry, then apply a second cover in the same manner before reassembling the door.