Exterior wood doors on your home have a tendency to get a mess of use, and a reflexive, superbly painted front door makes a great early introduction on guests. Assuming that you’ve purchased another wood door, you recently know how exorbitant they could be, prime and paint it properly for a considerable length of time of use. Older, previously painted wood doors need to be cleaned, scraped and sanded intermittently to look better and last more extended. Pick a warm, dry day, and begin in the morning. By sunset your exterior wood door will be converted and primed to use.
- Remove the door handle, letter drop opening, door-knocker and any viable hardware from the door. In the event that they are used and covered with old paint, clean them with heated water to remove the paint, or consider acquiring replacements.
- Clean the door with warm water, gentle cleanser and a wipe, in the event that it is painted or prepared. In the event that its just took the ribbon off new bare wood, you don’t have to clean it. Sand new wood with 120-gravel sanding paper or a sanding wipe to remove fragments and rough grain.
- Fill gouges and holes with woodworker’s wood putty. Wood putty holds up superior to spackling glue and dries quicker.
- Sand it smooth. Using a force palm sander is the quickest approach to smooth down a door. Caulk open joints or crevices between the sheets with silicone caulking that could be painted. Prime bare wood with acrylic water-based preparation, and permit it to dry for two to four hours. Sand the preparation lightly once its dry for the smoothest conceivable finish.
- Apply a cover of 100 percent acrylic exterior paint to the front of the door and the edge where the hinges are, since this is the edge you’ll see when its opened. The inside edge opens into the house – this edge ought to be the same color as the interior side of the door. Use a 2- or 3-inch high caliber brush. In the event that you decide to use a roller on parts of the door, use an exceptionally short-napped roller, and brush before you roll.
- Paint the door, and use no less than two layers of paint. The point when the last layer is dry, replace the door handle and other hardware.